I bought new karma and ı tired every way for calibration but it doesn't work every time giving error .. I have turned around 12321 times but no calibration !
If you have any solutions ?
yes 2.0 version last one and if there is any other update ı can't find that because of control panel , when ı check from controller its saying all updates new so ı don't know what is happeningHave installed all the new updates?
Sent from my iPhone using Tapatalk
First, keep the controller at least 10 feet away from the drone. As others have said, you also want to be in an area free from interference. Don't have a phone or other electronic devices on your person. Stay away from metal (both above and below ground). Avoid concrete that might have metal reinforcement. Don't calibrate on sand that might have magnetite in it.
Try calibrating the acceleromter first. I don't know why this helps, but when the compass is having difficulty calibrating it sometimes helps. If you do get the drone calibrated, fly for a few minutes, land, and then calibrate the acceleromter again. It's best done when the drone components are at operation temperature.
You need to have the controller and drone connected to calibrate.
Both the drone and controller have GPS chips. If the controller doesn't have GPS it might be getting interference. Treat the controller the same way as the drone and avoid having it near electrical devices.
Also, check for Geomagnetic interference. Currently the Kp is at 5. Anything 4 or higher will give communication interference. It looks like October 16 will be a better day with a kp of 3.